Chinese English
Home   About Us   News   Products   Ability   Network   Environment   Quality   Case   Feedback   Contact Us
Pinghu Xinye Fasteners Co.,Ltd.
Date:2015/9/16    Author:admin    Hits:3685 
Mechanical properties of fasteners Nuts made of stainless-steel

This standard specifies the austenite, martensite and cable corrosion resistant stainless steel manufacturing, under the condition of the ambient temperature of 15 ~ 25 ℃ during test, the mechanical properties of the nut. Under the high or low temperature, its performance may be different.

This standard is adopt nut:

Thread nominal diameter D < 39 mm;

Meet the requirements of GB/T 92 common thread;

Meet the requirements of GB/T 193 diameter and pitch combination;

Basic dimensions meet the requirements of GB/T 196;

Meet the requirements of GB/T197 tolerance;

Any shape;

The edge width in accordance with GB/T 3104;

Nominal height > 0.5 D.

Without this standard the following performance requirements:

Locking performance;


Corrosion resistance and oxidation resistance under special circumstances.

The purpose of this standard is to the performance of the stainless steel fasteners for grading. Some material in the air that can be used to the temperature to 200 ℃, and some material in the air that can be used to ten a temperature of 800 ℃. Effects of temperature on mechanical properties data, see appendix D (hint of appendix)

Over the use of high temperature or below freezing, oxidation and mechanical properties, corrosion resistance must by users and manufacturers agreement according to every special occasion. Appendix E (hint of appendix) is given about the influence of carbon content on the intergranular corrosion under high temperature conditions.

Copyright© 2015 Pinghu Xinye Fasteners Co.,Ltd.
Add:Pinghu LindaI days Ji Road No. 18    Tel:0086-573-89502288    Fax:0086-573-89502287